Some users of decking floor feel bad after their use. In fact, many problems are due to the appalling way of installation. The approach of installation is a key factor to decide the performance and duration of composite decking. But many users know little about the installation. So it is necessary to let our customers know the relevant notice.
2. Make the subject for installation even, dry and clean. Shovel the obviously uneven place and clean the sundeck. Dont install deck if the subject is not smooth enough.
3. The usual wastage is around 4% of the total installation area. Nonetheless, the wastage will be more if your house has stairs or your house is abnormal. Consider the quantity when you buy the products. Talk with the seller of the deck to confirm the time of installation.
4. Talk with the installer to choose the way of installation, specifically choosing the direction of installation. Wrong direction will affect the book a great deal.
5. Check the brand, design, quantity, click type, ratings of wear resistance, core color, dimensions and quality of composite decking to see if it is the same as which you have ordered after the seller sends you the goods. If not, advise the seller to replace it as soon as possible.
6. Tell installer that which the place can be cut or nailed to avoid the damage of water pipe, other pipes and lines before installer installs skirting and other accessories at the door and wall.
7. The underlay to be put on the subject directly should be connected well at their joints. And adhesive tape should be used to glue the joints. The vapour from the subject is easy to touch the back of the deck from the leak if the work isn't did properly.
8. Appoint the place for the installer to cut the planks. The planks can be cut in the bathroom, corridor or balcony. Cut plank on the underlay as it will make trouble for the installed future work.
9. The gap between wall and composite deck should be between 8mm and 9mm. The plan will expand and shrink. If there is no space for the movement, they will become curved and push up at the joints. Most users choose 8.3mm planks. So you can use a cut 8.3mm thick planks as the gap standard and insert it in the gap. Remember to pick up the cut planks when installing skirting, otherwise the planks can expand and shrink freely. The cut plants should not be put at the end or head of the deck if their length is less than 220mm.
10. The gap between the bottom of the door and the deck(including the accessory installed on the deck) should be between 4mm and 5mm so that the door still can work perfectly after it sinks.
11. The planks should be orderly in transverse and lengthways direction. Each row should be in line.
12. The accessories such as T-moulding or quarter round should be used if the width or length of the deck is over 9m to offer space for the bulge and contract. Also accessories should be used at the joints between room and outer place.
13. The gap between the wall and the accessories should be seemly. The gap should allow the plans to expand and shrink freely. Furthermore, it should cover the gap between the planks and the wall to avoid the exposure of it.
14.Talk with installer timely if there is something incomprehensible or you want to change some design. Talk with the seller directly if you still dont understand the matter to solve the problem timely.
15. Furniture should not be put on and people should not walk on the deck until 12 hours later because the plants will expand or shrink after installation. Besides the locking system begins to work in this period. There is still some time needed for the plants to be compatible fully with each other. Pressure should not be put on the plants during this period.
没有评论:
发表评论